Witch Fuel Injectors
Overview
Witchdrive Fuel Injectors have one function: to make your ship go very very fast almost instantaneously. They do not boost you to the speed of your ship's hyperspeed, and unlike the hyperspeed, they continuously burn fuel to augment your inertialess prime mover. Although they are not as fast as the intra-system hyperspeed drive, they cannot be mass locked.
Usage
Witch fuel injectors are possibly one of the most versatile enhancements you can fit to your ship. They can be used for simple tasks such as speeding up the hyperspace exit procedure (inject away from the space station for a couple of seconds during hyperspace countdown to ensure you don't get the frustrating 'Too close to station' message and a failed jump), they can be used to reduce the time you spend mass-locked waiting to pass slower ships on your way to a planet's space station, and they can be used to enhance your combat performance. Many new combat tactics can be explored with the boost of the witch fuel injectors. The injectors can also be used to escape ECM hardened missiles which would otherwise cause severe damage or the destruction of your ship. They can be used to catch a fleeing pirate who would otherwise outrun your ship and mete out sweet vengeance.
You must bear in mind that the injectors require witch space fuel - and this comes from the same tank as your hyperdrive's supply. If you hyperspace to a system at the edge of your ship's range, you will have little fuel to use with the witch space fuel injectors. If you are intending to get into situations where it becomes necessary to use the injectors frequently, it is a good idea to plan hyperspace jumps to leave plenty of fuel for usage in the injectors. Typically, a third of a tank of fuel will last long enough for most purposes.
If you are ambushed by Thargoids in witch space, be extremely careful when using injectors - you don't want to use so much fuel that by the time you've finished with the Thargoids, there are no systems within hyperspace range! It is a good idea to have a system selected. This will put a marker on your witch fuel gauge which indicates how much fuel is needed for that jump. You will then know to stop using injectors before the fuel falls below that level.
To activate the fuel injectors press and hold the I key. Once the key is released the injectors will stop working. This will help conserve fuel. For example, if you become mass locked whilst using the jump drive then press and hold the I key until the ships on your short-range scanner have moved out of range. Then you can release the I key and reselect J to continue your jump.
Availability
Cr. 600.0 Cr. Techlevel: 11
Oolite Equipment
|
