Laser Cooler

From Elite Wiki
Revision as of 04:38, 18 March 2024 by Phkb (talk | contribs) (Updating BB links)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Laser Cooler OXP
Name Laser Cooler
Cost 5,000₢
TL Availability 5

Toggle your weapons off and then on (press the underscore key twice) when the heat of the actual laser exceeds 60% to attach the Cooler. Then "fire" your laser until all the heat is dissipated.

Do not press the weapons able/disable key a second time too quickly after the first press, otherwise the Cooler cannot attach. The Cooler must spend about 1/4 sec with weapons disabled in order to get the "Laser Cooler attached" message. You can then toggle on your weapons again.

The cooler will automatically detach when finished or when only 1.0 ly fuel remains and your laser opens fire instantly. Stop cooling when a friendly target is in your crosshairs to avoid accidental hits.

This equipment uses a lot of energy as well as the fuel for cooling. It also needs a ship over 130t mass such as a Cobra Mark III. Your cabin temperature will be higher due to the ship's taking onboard the heat from the laser.

Your cooler can be attached to more than one laser at the same time.

You can detach the cooler from your laser anytime by toggling your weapons off and on.

The cooler cannot start working until the laser is overheating. Usually this is not a noticeable problem, except if you use Laser Cannons with high heat where you probably need to wait a bit or should start cooling one shot before overheat.

Military Laser.png

License

This work is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike License version 4.0. If you are re-using any piece of this OXP, please let me know by sending an e-mail to norbylite at gmail dot com.

This equipment requires Oolite v.1.82 to work.

Download

Laser_Cooler_1.2.oxz (downloaded 0 times). Note that the download counter is stuck!

Laser_Cooler_1.1.oxz (downloaded 2718 times).


Changelog

2020.05.05. v1.2  Fixed integration issues with New Lasers, improved integration with XenonHUD.
2015.08.01. v1.1  Fuel usage and cabin temp raising added, thanks to avder and Disembodied.
2015.08.01. v1.0  First release.


Quick Facts

Levelindicator0.png
0-{{{2}}}
Version Released License Features Category Author(s) Feedback
1.2 2020-05-05 CC BY-NC-SA 4 Laser Cooler Equipment OXPs Norby BB-Link

Warning

This oxp introduces the chance of your laser breaking - and the chance of this is much greater if you do not have the laser cooler attached! See here for more detail.