Carriers

When this addon will be finished then players can build up an escort fleet within a main ship. Currently a few Carrier models are ready with various ships on board. You can do a test flight but the escorts are decorations only until the scripts will be finished.

The hull of Carriers is barely fit into a standard 64m x 192m x 250m dock, together with the carried ships on decks.

Main decks

Side decks can hold a pair of large ships up to Anaconda or as many smaller ships as can fit into the 2x140m long decks, for example 4 Asp, 6 Fer-De-Lance or 8 Adder.

Top deck over the middle engine can hold exactly one ship with less than 35m height, 130m width and 95m length which mean a Cobra Mark III or smaller ships. This position acts as a command bridge: Commanders in this ship will be able to steer the Carrier and launch immediately without undocking. In this case the Carrier is a large escort bay under the Commander's ship.

Extended decks

Must buy additional equipments to utilize small surfaces for holding light escort ships.

Front deck on the nose: store a pair of small ships (max.65x52x15m WxLxH): Adder, Gecko or Sidewinder.

Center deck on the neck: for two Adders (30x52x15m).

Aft side decks over side engines: hold small escorts (65x52x15m): Adder, Gecko or Sidewinder.

Cargo

If you have 5 Cobra Mark I on board then your total cargo capacity is 100t, but you will not see this in one piece.

You will be able to switch between your ships when you are in a dock but you will see one cargo bay at a time.

If your goal is a really big trader ship then gather enough money to buy two Anacondas into your carrier.

Instructions

In Oolite v1.79 or later do not unzip the .oxz file, just move into the AddOns folder of your Oolite installation. In Oolite v1.77 make a Carriers.oxp subfolder in your AddOns folder and unzip the .oxz file into the newly created subfolder.

There are savegames in the package, copy into your oolite-saves directory if you want a test flight.

License

The 3D model is derived from HammerHead in Aquatics OXP, thanks to Thargoid and P.A. Groove.

This work is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike License version 4.0. If you are re-using any piece of this OXP, please let me know by sending an e-mail to norbylite at gmail.com.

Changelog

2014.06.17. v0.3  Narrower head on Carriers to fit Anaconda in straight.
2014.06.16. v0.2  Anaconda and Fer-De-Lance Carrier models added.
2014.06.15. v0.1  First ship models.

Download Carriers OXZ (downloaded 230 times).

Quick Facts

0-{{{2}}}

Version	Released	License	Features	Category	Author(s)	Feedback
0.3	2014-06-17	CC BY-NC-SA 4	More ships on board	Ship OXPs	Norby	BB-Link