Oolite JavaScript Reference: World script event handlers

From Elite Wiki
Revision as of 00:00, 30 April 2011 by Kaks (talk | contribs) (→‎Other)

This page provides an exhaustive list of event handlers which can be implemented inside world scripts JavaScript scripts for Oolite.

Most event handlers can be used both in world scripts and in ship scripts. Generally speaking, handlers starting with "ship" can be used for both scripts and those starting with "player" are meant only for the player (= can only be used in a world script). Exceptions on this rule are mentioned with the individual handlers below.

World scripts can be either found inside Config\script.js, or be distinctly named .js files inside the Scripts directory - in the latter case, the worldScript.plist will list the active world scripts.

World scripts are always active.

Game State

startUp

The startUp handler is called after all OXPs have been loaded. It can be used to do one-off initialisation such as registering to listen for certain keystrokes etc. note that keystroke listening is not implemented. (world script only) 

this.startUp = function()
{
     // Your code here
}

reset (removed in 1.74)

The reset handler is called whenever the player is respawned, such as after dying or when loading a saved game. It should be used to reset any local state in the script. (world script only) 

this.reset = function()
{
     // Your code here
}

in 1.74 the startUp event is called in its place, eliminating the need for two separate events.


playerWillSaveGame

This property was added in Oolite test release 1.75.
The playerWillSaveGame handler is called whenever the player saves a game. The transferred message is one of the following strings: 'standardSave', 'autoSave' or 'quickSave' 

this.playerWillSaveGame = function(message : String)
{
     // Your code here
}

Using this event is useful for storing temporary variables in missionVariables, just before the game gets saved. missionVariables are slow in use compared to normal JS variables, therefor their use should be minimised for efficient code. The main benefit of using missionVariables is that they are saved in a saved game.

Docking

shipWillDockWithStation

The shipWillDockWithStation handler is called at the beginning of the docking tunnel effect. 

this.shipWillDockWithStation = function(station)
{
     // Your code here
}

At this moment "ship.dockedStation == null", "ship.docked == true", "ship.status == STATUS_DOCKING"


shipDockedWithStation

The shipDockedWithStation handler is called at the end of the docking tunnel effect. 

this.shipDockedWithStation = function(station)
{
     // Your code here
}

At this moment "ship.dockedStation == the station", "ship.docked == true", "ship.status == STATUS_DOCKED" and "gui_screen" is either GUI_SCREEN_STATUS or GUI_SCREEN_REPORT. However, any identical handler from an other oxp could have changed those values. Never count on it but double check when important.


shipWillLaunchFromStation

The shipWillLaunchFromStation handler is called at the beginning of the launch tunnel effect. 

this.shipWillLaunchFromStation = function(station)
{
     // Your code here
}

At this moment "ship.dockedStation == the station", "ship.docked == false", "ship.status == STATUS_LAUNCHING".

shipLaunchedFromStation

The shipLaunchedFromStation handler is called at the end of the launch tunnel effect. 

this.shipLaunchedFromStation = function(station)
{
     // Your code here
}

At this moment "ship.dockedStation == null", "ship.docked == false", "ship.status == STATUS_IN_FLIGHT".

playerStartedAutoPilot

The playerStartedAutoPilot handler is called when the player starts autopilot docking. It is not called for the instantaneous dock command. 

this.playerStartedAutoPilot = function()
{
     // Your code here
}


playerCancelledAutoPilot

The playerCancelledAutoPilot handler is called when the player cancels autopilot docking. 

this.playerCancelledAutoPilot = function()
{
     // Your code here
}


playerDockingRefused

The playerDockingRefused handler is called when a station refuses to provide autopilot docking instructions. 

this.playerDockingRefused = function()
{
     // Your code here
}


playerRequestedDockingClearance

The playerRequestedDockingClearance handler is called when a station answers on a docking request of the player by targeting the station and pressing L (shift-l). 

this.playerRequestedDockingClearance = function(message)
{
     // Your code here
}

Message is a string and can take the values: "DOCKING_CLEARANCE_GRANTED", "DOCKING_CLEARANCE_DENIED_TRAFFIC_OUTBOUND", "DOCKING_CLEARANCE_DENIED_TRAFFIC_INBOUND", "DOCKING_CLEARANCE_DENIED_SHIP_FUGITIVE", "DOCKING_CLEARANCE_NOT_REQUIRED", "DOCKING_CLEARANCE_EXTENDED" or "DOCKING_CLEARANCE_CANCELLED".

Witchspace Jumps

playerStartedJumpCountdown

The playerStartedJumpCountdown handler is called when the user starts a witchspace or galactic witchspace jump countdown. The type parameter is a string specifying which type of jump is occuring; currently, the possible values are “standard” and “galactic”. Other values may be added in future. 

this.playerStartedJumpCountdown = function(type)
{
     // Your code here
}


playerCancelledJumpCountdown

The playerCancelledJumpCountdown handler is called when the user cancels a witchspace or galactic witchspace jump countdown. 

this.playerCancelledJumpCountdown = function()
{
     // Your code here
}


playerJumpFailed

The playerJumpFailed handler is called at the end of a witchspace or galactic witchspace countdown, if the jump is not possible. The reason parameter is a string specifying why the jump failed; currently, the possible values are “blocked”, “too far” and “insufficient fuel”. Other values may be added in future. 

this.playerJumpFailed = function(reason)
{
     // Your code here
}


shipWillEnterWitchspace

The shipWillEnterWitchspace handler is called immediately before a witchspace jump, while the player is still in the starting system. The cause parameter is a string specifying what sort of jump is occuring; currently, the possible values are “standard jump”, “galactic jump” and “wormhole”. Other values may be added in future. 

this.shipWillEnterWitchspace = function(cause)
{
     // Your code here
}


shipWillExitWitchspace

The shipWillExitWitchspace handler is called as a witchspace jump concludes. When it is called, the player is (from a program perspective) in the destination system, but the tunnel effect has not yet been shown. Use this event to set up elements which need to be present in-system after the player exits witchspace. 

this.shipWillExitWitchspace = function()
{
     // Your code here
}

shipExitedWitchspace

The shipExitedWitchspace handler is called after a witchspace jump has concluded and the tunnel effect has been shown. 

this.shipExitedWitchspace = function()
{
     // Your code here
}

playerEnteredNewGalaxy

The playerEnteredNewGalaxy handler is called just before shipWillExitWitchspace.

the sequence of events for a player jumping to a different galaxy is as follows:

shipWillEnterWitchspace (world event)
playerWillEnterWitchspace (NPC ship event)
playerEnteredNewGalaxy (world event)
shipWillExitWitchspace (world event)
shipExitedWitchspace (world event)

this.playerEnteredNewGalaxy = function(galaxyNumber)
{
     // Your code here
}

Enter/Exit Aegis

shipEnteredStationAegis

The shipEnteredStationAegis handler is called when the player enters the aegis of the main-station (2x scanner range from main-station). Other stations than the main-station don't give aegis messages. 

this.shipEnteredStationAegis = function(station)
{
     // Your code here
}

shipExitedStationAegis

The shipExitedStationAegis handler is called when the player leaves the aegis of the main-station (2x scanner range from main-station). 

this.shipExitedStationAegis = function(station)
{
     // Your code here
}

shipEnteredPlanetaryVicinity

The shipEnteredPlanetaryVicinity handler is called when the player enters the planet aegis (3x planet radius). 

this.shipEnteredPlanetaryVicinity = function(planet)
{
     // Your code here
}

shipExitedPlanetaryVicinity

The shipExitedPlanetaryVicinity handler is called when the player leaves the planet aegis (3x planet radius). 

this.shipExitedPlanetaryVicinity = function(planet)
{
     // Your code here
}

shipApproachingPlanetSurface

The shipApproachingPlanetSurface handler is called when the player is very close to the planet (crosses a border ± 500 meter above the surface). 

this.shipApproachingPlanetSurface = function(planet)
{
     // Your code here
}

shipLeavingPlanetSurface

The shipLeavingPlanetSurface handler is called when the player leaves the planet (crosses a border ± 500 meter above the surface). 

this.shipLeavingPlanetSurface = function(planet)
{
     // Your code here
}

Combat

alertConditionChanged

The alertConditionChanged handler is called when the player’s alert status (player.alertCondition) changes. Only the player and stations have an alert condition. (world script and station scripts) 

this.alertConditionChanged = function(newCondition, oldCondition)
{
     // Your code here
}

playerTargetedMissile

The playerTargetedMissile handler is called when the player targets the nearest missile by pressing T (shift-t) on the keybord. 

this.playerTargetedMissile = function(missile)
{
     // Your code here
}

shipAttackedWithMissile

The shipAttackedWithMissile handler is called when a missile is fired. missile contains the missile entity and whom the identity of the ship that launched the missile. 

this.shipAttackedWithMissile = function(missile, whom)
{
     // Your code here
}

shipBeingAttacked

The shipBeingAttacked handler is called when a laser shot hits. whom the identity of the ship that attacked. 

this.shipBeingAttacked = function(whom)
{
     // Your code here
}

shipBeingAttackedByCloaked

The shipBeingAttackedByCloaked handler is called when a laser shot from a cloaked ship hits. Guess what, there is no parameter because he is cloaked! 

this.shipBeingAttackedByCloaked = function()
{
     // Your code here
}

shipTargetDestroyed

The shipTargetDestroyed handler is called when the target gets destroyed. target contains the destroyed target entity. This command is always preceded by the shipTargetLost handler. 

this.shipTargetDestroyed = function(target)
{
     // Your code here
}

shipDied

The shipDied handler is called when the ship or player dies. Expect a reset() shortly when it is the player ship. 

this.shipDied = function(whom, why)
{
     // Your code here
}

whom contains the entity that caused the kill. why is the cause written as string and is one of: "removed", "hit a planet", "energy damage", "scrape damage", "heat damage", "cascade weapon".
("cascade weapon" is new in 1.74 and "removed" / "energy damage" were accidentally switched in 1.73)


shipFiredMissile

This property was added in Oolite test release 1.74.
The shipFiredMissile handler is called when a missile is fired. missile contains the missile entity and target the identity of the target. The handler is send to the ship that launched the missile. 

this.shipFiredMissile = function(missile, target)
{
     // Your code here
}

shipTargetLost

The shipTargetLost handler is called when the target gets lost. target contains the lost target entity.
(As with Oolite 1.71 this is not yet working properly. It returns not the right target but just "unknown". It does nothing when target lost because of "out of range") 

this.shipTargetLost = function(target)
{
     // Your code here
}

shipTargetCloaked

The shipTargetCloaked handler is called when the target cloakes. 

this.shipTargetCloaked = function()
{
     // Your code here
}

Equipment

equipmentDestroyed

The equipmentDestroyed handler is called when equipment gets destroyed completely beyond repair. (in strict mode) (world script only) 

this.equipmentDestroyed = function(equipment)
{
     // Your code here
}

equipmentDamaged

The equipmentDamaged handler is called when equipment get damaged. (world script only) 

this.equipmentDamaged = function(equipment)
{
     // Your code here
}

playerBoughtEquipment

The playerBoughtEquipment handler is called when equipment is bought at the outfit screen. 

this.playerBoughtEquipment = function(equipment)
{
     // Your code here
}

playerBoughtNewShip

The playerBoughtNewShip handler is called when a new ship is bought. May be needed to re-evaluate the old equipment as buying a new ship does not trigger equipment removal. 

this.playerBoughtNewShip = function(ship)
{
     // Your code here
}


Other

compassTargetChanged

This property was added in Oolite test release 1.74.
The compassTargetChanged handler is called when a new target is selected. Mode can be any of the following: 

COMPASS_MODE_BASIC
COMPASS_MODE_PLANET
COMPASS_MODE_STATION
COMPASS_MODE_SUN
COMPASS_MODE_TARGET
COMPASS_MODE_BEACONS

script example 

this.compassTargetChanged = function(whom, mode)
{
     log(' Now targeting ' + whom);
     // Your code here
}

guiScreenChanged

The guiScreenChanged handler is called when the guiScreen changes. 1.71 only transfers the "to" screen. 1.72 will also transfer the "from" screen. Note that the screen can have changed again in the meantime. (world script only) 

this.guiScreenChanged = function(to, from)
{
     // Your code here
}

guiScreenWillChange

This property was added in Oolite test release 1.74.
The guiScreenWillChange handler is called when the guiScreen is about to change. It only fires for the screens: GUI_SCREEN_EQUIP_SHIP, GUI_SCREEN_MANIFEST, GUI_SCREEN_MARKET and GUI_SCREEN_SHIPYARD. On these screens a script could change the content of the page to be displayed. In Oolite 1.75 will 'GUI_SCREEN_SYSTEM_DATA' be added to this list. (world script only) 

this.guiScreenWillChange = function(to, from)
{
     // Your code here
}

missionChoiceWasReset

The missionChoiceWasReset handler is called when the mission choice is set to null via script (either using the legacy script method resetMissionChice, or using mission.choice = null; in javascript) 

this.missionChoiceWasReset= function()
{
     // Your code here
}

missionScreenEnded

The missionScreenEnded handler is called when the missionscreen ends. Note that an other script may have put up a new missionscreen in the meantime. (world script only) 

this.missionScreenEnded = function()
{
     // Your code here
}

missionScreenOpportunity

This property was added in Oolite test release 1.74.
The missionScreenOpportunity handler is called if there are no mission / report screens active, and the player is docked to a station. It gets fired at game startup, upon docking, and after a docking report or previous mission screen has ended. (world script only) 

this.missionScreenOpportunity= function()
{
     // Your code here
}

This handler works a bit different as other handlers. It fires for every installed oxp, until an oxp creates a mission screen during this handler. Than it stops. When the mission screen ends and there is no callback function that created a new mission screen, than the missionScreenOpportunity is send again to all installed oxps, starting with the oxp that used the mission screen as last one. All this means that when this handler fires, it is safe to show a mission screen and no further test are needed.

reportScreenEnded

This property was added in Oolite test release 1.73. The reportScreenEnded handler is called when the last arrival-report screen ends. This is a screen that should not be written by a missionscreen. The code should wait until this eventhandler fires. Note that an other script may have put up a new missionscreen in the meantime. (world script only) 

this.reportScreenEnded = function()
{
     // Your code here
}

shipCollided

The shipCollided handler is send after a collision with otherShip. 

this.shipCollided = function(otherShip)
{
     // Your code here
}

shipScoopedOther

The shipScoopedOther handler is called when a ship scoops scripted_cargo. ("cargo_type" = CARGO_SCRIPTED_ITEM) Other cargo, even scooping escapepods, doesn't trigger a handler.
The scooped item is transferred as argument. The scooped cargo itselfs gets the handler: shipWasScooped with the scooper as argument. 

this.shipScoopedOther = function(whom)
{
     // Your code here
}

shipSpawned

The shipSpawned handler is called after a ship has been added to the system. After a witchspace jump it means that first all ships are added to the system, then all the relevant shipSpawned events are triggered.
This handler for the woldScript is new since Oolite 1.74. After the event is sent to the shipScript, it is now also send to the worldScript with the added entity as argument. 

this.shipSpawned = function(ship)
{
     // Your code here
}

shipLaunchedEscapePod

The shipLaunchedEscapePod handler is called when the player bails out. This will be followed by a shipWillDockWithStation()/shipDockedWithStation() pair after a few seconds. 

this.shipLaunchedEscapePod = function(escapepod)
{
     // Your code here
}

tickle

The tickle handler is called periodically-ish, whenever the old plist scripts are updated. For performance reasons, it is reccomended that you avoid using this if possible, but it may be needed until the planned timer mechanism is implemented. (world script and ship scripts)

The status parameter is a string containing the player’s current status - “STATUS_IN_FLIGHT” and “STATUS_DOCKED” being commonly-seen examples. 

this.tickle = function(status)
{
     // Your code here
}

viewDirectionChanged

This property was added in Oolite test release 1.75.
The viewDirectionChanged handler is called when the player view changes, with a string to indicate which view the player is facing. Its possible values are "VIEW_FORWARD", "VIEW_AFT", "VIEW_PORT", "VIEW_STARBOARD", "VIEW_CUSTOM", "VIEW_GUI_DISPLAY". 

this.viewDirectionChanged= function(viewString)
{
     // Your code here
}

Missing Events

All the initially planned events have been implemented in 1.74.

If there are other events you would like to be able to respond to, please write a request on the forum.

See also: ship_script_event_handlers

Retrieved from "https://wiki.alioth.net/index.php?title=Oolite_JavaScript_Reference:_World_script_event_handlers&oldid=27552"