Difference between revisions of "Clippers"

From Elite Wiki
m (Added reference to HUD)
m (Added link to BB thread)
Line 86: Line 86:
 
[[Image:clipper-main.png|center]]
 
[[Image:clipper-main.png|center]]
  
[[Image:ev-logos.png|center]]
+
==Oolite Forum thread==
 +
 
 +
Any questions, problems or bug reports should be posted on this OXP's BB thread [http://aegidian.org/bb/viewtopic.php?f=4&t=11370 here]
  
 
{{ship-OXP}}
 
{{ship-OXP}}

Revision as of 14:23, 26 December 2011

Python Clipper
Pc300.png
Size (metres, W×H×L) 80 × 40 × 130
Cargo capacity 75 TC
Cargo bay extension N/A
Maximum speed 0.325 LM
Manoeuvrability Roll: 2.2
Pitch: 1.0
Energy banks 6
Energy recharge rate Good (4.0)
Gun mounts Fore, Aft
Port, Starboard
Missile slots 4
Shield boosters available Yes
Military shields available Yes
Hyperspace capable Yes
OXP or standard OXP
Available to player Yes
Base price 375000 Cr


Boa Clipper
Bc300.png
Size (metres, W×H×L) 65 × 60 × 115
Cargo capacity 150 TC
Cargo bay extension N/A
Maximum speed 0.362 LM
Manoeuvrability Roll: 2.5
Pitch: 1.0
Energy banks 8
Energy recharge rate Medium (3.2)
Gun mounts Fore, Aft
Port, Starboard
Missile slots 5
Shield boosters available Yes
Military shields available Yes
Hyperspace capable Yes
OXP or standard OXP
Available to player Yes
Base price 525000 Cr


Clippers OXP

Overview

Following the success of their Clipper upgrade to the Boa 2, the Gerege Federation SpaceWorks felt that a similar upgrade to a smaller freighter would also be worthwhile. Following negotiations with Whatt and Pritney, they obtained a licence to adapt Python hulls to 'Clipper' specification. The Clipper concept is for fast transporters capable of delivering cargo quickly over vast distances, and it is also considered important that these ships can hold their own against bandit and pirate attacks. To these ends, both Python and Boa Clippers have sacrificed some cargo space to allow fitment of extra drive units allowing higher top speeds. GFS favour the DeClapton and Layla Quark-scintillation StarDrive as these units are powerful yet compact and are extremely reliable. In keeping with their role as long distance express transports, both Clipper models are equipped as standard with Fuel Scoops and Heat Shielding to allow 'sunskimming', and with the introduction of the Python variant external secondary fuel tanks were introduced across the range. These hold 4LY of fuel and this can be moved into the main tanks when their level falls below 3LY. Owners of Series One Boa Clippers are offered a cost-price retro-fit of these tanks. These ships also have a custom HUD, an adaptation of the standard HUD which is easier on the eye and has re-positioned console and comms messages.

Python Clipper

The Python Clipper has two Drive units with a reduction in cargo capacity of 25TC over the original Python, leaving a hold of 75TC capacity. The original Python was also noted for its lack of modern equipment options and poor armaments and these issues have been addressed in the Clipper. The Python Clipper has one less energy bank than the original Python (six rather than seven) and no cargo expansion option, but the space freed-up has allowed much more powerful rechargers to be fitted and also allows for four missile pylons, double that of the Python. Military Shield Boosters can also be fitted to the Clipper. Performance, handling and top speed are all noticeably better than a standard Python.

Boa Clipper

The Boa Clipper has three Stardrives and a cargo capacity of 150TC. Top speed and handling is improved over the Boa 2 but all other specifications are the same. With a full range of equipment options available and eight energy banks with efficient rechargers already included, there was little room for improvement over the standard Boa 2. Since its introduction, the Boa Clipper has sold over 850 units, making it GFS' most successful model ever.

Original Boa Clipper OXP

This OXP replaces the Boa Clipper OXP. I have tried to make the transition to the new OXP seemless and the upgrade to External Fuel Tanks as easy as possible. If you already have the Boa Clipper OXP installed, simply remove it and replace it with Clippers OXP. Owners of Series One Boa Clippers are offered a cost-price retro-fit of the External Fuel Tanks. If your player ship is a Boa Clipper go to the F3 screen (outfitters) once this new OXP is installed and you will see 'External Fuel Tanks - Full' listed at a cost of 500Cr. Click on this and your Clipper will be upgraded with External Fuel Tanks. Once used these can be refilled for 40Cr.

Compatibility

This OXP is compatible with ExtraFuelTanks OXP. Both OXPs can be installed together. If you fly a Boa or Python Clipper with External Fuel Tanks you will not see ExtraFuelTanks offered, but if you have several Commanders flying various ships and use ExtraFuelTanks these will continue to work normally.

Author

OXP by Smivs

Credits

Many thanks to Griff for allowing me to 'borrow' the engine model from his 'Boa', and to Okti for advice and help scripting the external fuel tanks.

License

This work is licensed under the Creative Commons Attribution-Noncommercial-Share Alike 3.0Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/3.0/ or send a letter to Creative Commons, 171 Second Street, Suite 300, San Francisco, California, 94105, USA.

Version History

Version 1.0 Released 22nd December, 2011.

Download

Clippers OXP direct download from Smivsonline.

Installation

Unzip the download and place the .oxp folder in your Oolite AddOns folder.

Clipper-main.png

Oolite Forum thread

Any questions, problems or bug reports should be posted on this OXP's BB thread here